Sheridan Electric Fireplace

• Comes fully assembled. All you need to do is plug it in.
• A compact size means it’s perfect for smaller spaces.
• The infrared heater heats up to 1000 sq. ft.
• Offers three levels of flame brightness and five levels of heat.
• Traditional sensibility with a clean, modern white finish is a dignified aesthetic.

Veneers
Dust the wood finish with a soft, clean cloth as needed. Strong chemical cleaners are not suggested, as they may damage the wood's finish.

• Mantel components
• Remote control
• Manual and hardware
• 1 Lithium coin cell battery (size CR2025)

• A 15 Amp, 120 Volt, 60 Hz circuit with a properly grounded outlet is required.
• Preferably, the fireplace should be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the fireplace is in operation.
• An extension cord or re-locatable power tap (outlet/power strip) should never be used.
• Do not use this fireplace if any part of it has been exposed to water. Immediately call a qualified service technician to inspect the item and replace any part of the electrical system that has been exposed.
• DO NOT mix old and new batteries.
• DO NOT use rechargeable silver oxide cell batteries with the remote control unit.
• DO NOT mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or explode.