A mattress in a bedroom setting. Use the listed dimensions to compare sizes. View product
Six common mattress sizes sold in Canada are twin, twin XL, double, queen, king and California king. Twin is also called single, and double is also called full. Those alternate names refer to the same nominal size, rather than additional sizes.
Use the chart below to compare mattress widths and lengths, then check the exact measurements of the product you are considering. A mattress-size label does not tell you the outside dimensions of its bed frame.
Canadian Mattress Size Chart in Inches and Centimetres
| Common name | Alternate name | Width × length (inches) | Width × length (cm, approximate) | What to consider |
|---|---|---|---|---|
| Twin | Single | 38 × 75 | 96.5 × 190.5 | A compact option for one sleeper. |
| Twin XL | — | 38 × 80 | 96.5 × 203.2 | The same nominal width as a twin, with extra length. |
| Double | Full | 54 × 75 | 137.2 × 190.5 | More width for one sleeper than a twin. |
| Queen | — | 60 × 80 | 152.4 × 203.2 | More shared sleeping space than a double. |
| King | — | 76 × 80 | 193 × 203.2 | Sixteen inches wider than a queen, with the same nominal length. |
| California king | Western king | 72 × 84 | 182.9 × 213.4 | Four inches longer and four inches narrower than a king. |
These are common nominal measurements, not a specification for every product. Some manufacturers list slightly different dimensions, including twin widths of 39 inches. Always confirm the exact product measurements, particularly when fitting a mattress to an existing frame, bunk bed or adjustable base. You can browse mattresses and compare individual models once you know your required size.
What Each Mattress Size Offers
Twin and Twin XL
A twin is a compact option for one sleeper and can suit a child’s room, guest room or another space where floor area is limited. If you are buying for a bunk bed, check the bed manufacturer’s required mattress dimensions and maximum thickness rather than relying on the twin label alone.
A twin XL adds five inches of nominal length without adding width. That can be useful for taller sleepers or a longer, narrow room. Twin and twin XL mattresses require different frame lengths and fitted sheets, so they are not interchangeable.
Double or Full
A double adds 16 inches of width to a 38-inch twin while keeping the same 75-inch nominal length. That gives one sleeper more room to spread out. Two adults can share a double, but each person has less width than they would on a queen.
Consider sleeper height as well as width. A person who is six feet tall is 72 inches tall, leaving only three inches of nominal mattress length beyond their height. Pillows and sleeping position affect how much of that length feels usable.
Queen
A queen is six inches wider and five inches longer than a double. It can provide more comfortable shared space without the width of a king, provided the bed frame fits your room and leaves enough clearance for everyday use.
Do not assume that fitting the mattress outline on the floor means the complete bed will fit. The headboard, footboard, side rails and any storage drawers can increase the space required.
King and California King
A king offers 16 more inches of width than a queen. That gives two sleepers more side-to-side space, although the mattress and frame also take up considerably more room.
A California king trades four inches of the king’s width for four inches of length. It may appeal to taller sleepers, while a standard king offers more width. Choose according to your room and the space you need rather than assuming either is larger in every dimension.
A split king commonly consists of two twin XL mattresses placed side by side. With compatible mattresses and a suitable adjustable-base system, the two sides can have separate positioning controls. Confirm every component’s specifications; a split king is not the same as a California king. RV and custom mattresses may use other dimensions entirely.
How to Choose the Right Bed Size
- Count the sleepers. Consider how much space each person prefers and whether a pet regularly shares the bed.
- Consider height and sleeping position. Compare the mattress length with your height and allow for the space you use when sleeping.
- Measure the room and the complete frame. Include the headboard, footboard, side rails and storage features. Roughly 60 cm of walking clearance can be a useful planning starting point, but your layout and access needs may require more.
- Check doors, drawers and furniture. Make sure wardrobe doors and drawers can open, and that the bed does not block vents or your walking route.
- Measure the delivery path. Check entrances, stairs, hallways, landings and ceiling clearance, including the dimensions of packaged components.
Mark the frame’s outside footprint with painter’s tape. Walk around it and open nearby doors and drawers before deciding. A taped layout is more useful than choosing a size from room dimensions alone.
Match the Mattress, Frame and Foundation
The mattress and frame must be designed for the same size. Check the frame’s intended mattress dimensions and support requirements; its outside width and length describe the furniture’s footprint, not the opening that holds the mattress. Compare bed frames using both sets of information where provided.
The foundation or base must also be suitable for the mattress. Check the manufacturer’s requirements for slat spacing, centre support, weight limits and any adjustable-base compatibility. A size match alone does not establish that two products work together. Review the specifications of box springs and mattress bases alongside the mattress instructions.
Mattress thickness affects total bed height, fitted-sheet depth and some frame applications, including bunk beds. It usually does not change the named width-and-length size. Check the full assembly, including any foundation or topper, if getting into and out of bed at a comfortable height matters to you.
Before You Order
- Confirm the exact mattress width, length and thickness.
- Match the mattress to the frame’s intended size and support system.
- Measure the complete frame footprint and required room clearances.
- Check foundation or adjustable-base compatibility.
- Confirm that the packaged components can reach the bedroom.
Frequently Asked Questions
-
Are Canadian and US mattress sizes the same?
-
Common nominal sizes generally use the same names and dimensions in Canada and the United States. Individual products can vary, so check exact measurements instead of assuming that a size label guarantees a fit.
-
Is a double bed the same as a full bed in Canada?
-
Yes. Double and full are two names for the same common nominal mattress size: 54 × 75 inches, or approximately 137.2 × 190.5 cm. Check the specific model’s listed dimensions before ordering.
-
What is the difference between a king and a California king?
-
A standard king is commonly 76 × 80 inches, while a California king is 72 × 84 inches. The California king is four inches longer and four inches narrower. Their fitted sheets and frames are not interchangeable.
-
Should a bed frame be the same size as the mattress?
-
Its intended mattress size should match. For example, a queen mattress needs a frame designed to support a queen mattress. The frame’s outside dimensions will usually be larger, so check them separately when planning your room.
-
Does mattress thickness change the bed size?
-
Thickness changes height rather than the nominal width-and-length size. It can affect sheet fit, ease of getting into bed and compatibility with certain frames. Always follow any mattress-height limits specified for a bunk bed.