A mattress pad adds a light layer of cushioning to your mattress, though some models include a layer of protection too. A topper is thicker, and it's primarily built to change how the mattress feels underneath you. Thickness and purpose are what separate a pad from a topper, and it's the starting point of this mattress pad vs. topper comparison. Below, we walk through what each one changes about your mattress and how to tell which layer your bed actually needs.

Mattress Pad vs. Mattress Topper: Key Differences at a Glance

Mattress pad materials generally favour light comfort layers, like quilted fibre or cotton blends; they are chosen for easy care. In contrast, mattress topper materials, such as foam or latex, are selected to completely change the way the mattress supports you.

Pro tip: If your mattress feels right and you just want to change softness slightly, a pad usually fits; if the feel of the surface needs to change, choose a topper.

What Are Mattress Pads, Toppers, and Protectors?

You'll also come across mattress protectors while shopping for a pad or topper, so it's worth separating them.

So, what does a mattress topper do that a protector doesn't? It changes the surface you sleep on. A protector goes over that same surface with one job: shielding the mattress from spills and everyday wear. This functional split is the core of any mattress topper vs. mattress protector comparison.

Be careful, as many retail listings blur these categories anyway, labelling padded protectors or protective pads as though the terms are interchangeable, so check what a product actually does before buying anything.

Which One Should You Choose?

Start with the outcome you want from your bed, then use the sections below to confirm fit and material details, and check the care instructions on the specific product page you're considering.

When to Choose a Mattress Pad?

So, what is a mattress pad used for? Mostly a lighter change to the softness of your mattress, with some models adding an extra layer of protection. It works well when your mattress already feels right and only needs softening.

What do you need to know before buying: whether it's waterproof, how it attaches to the mattress, the pocket depth it's built for, and whether it's machine washable. None of that follows from the product category, so look at the specific product page for these details.

When to Choose a Mattress Topper?

A topper is the better fit when you want a noticeable change in how the mattress feels underneath you.

What decides the change: the material and construction of the specific mattress toppers you're comparing. Two toppers in the same category can shift the feel by very different amounts. Also, check the added height and the care requirements for each topper separately.

One thing worth remembering: a mattress topper can't help with serious structural damage or deep sagging. If that's what's happening, look at repair or replacement instead.

When to Choose a Mattress Protector?

A protector is the right pick when your main goal is protecting the mattress itself.

What to confirm before buying: protection levels vary by product, so if you need waterproofing, confirm the listing itself uses the word waterproof.

One thing to note: some protectors are sold as padded protectors, adding cushioning alongside the protection, which is where a mattress pad vs. protector mix-up usually starts. If you are interested in protectors, choose based on verified protective features the listing confirms. Browse mattress protectors and pads to compare what's available.

Compare Materials and Performance Features

As the sections above show, a product category alone doesn't predict comfort, temperature, durability, or care. These factors depend on what's inside, and 3 sections below cover the material specifics to check before buying.

Quilted Fibre, Cotton, and Wool

These three materials show up as cover or fill layers in both pads and toppers, and the exact build behind each product shapes how the surface feels. That's the practical difference between a mattress pad and topper: pads use them for a lighter surface change, while toppers rely on a denser build for more noticeable support. Don't assume breathability or allergy benefits from the fibre type alone. Verify the material makeup on the product page, and check the certification and care details separately.

Memory Foam, Latex, and Other Foam Toppers

Memory foam contours slowly; it softens under body heat and holds that shape. Latex responds faster and pushes back under weight. Here's the additional information that will help you to understand toppers better:

Density is a weight measure, so it points to durability more than feel. Thickness is what sets the added height. Firmness gets rated separately, so check both numbers on the listing. Odour and heat retention can vary from one product to the next, even within the same foam type. Firmness does too. Verify these details on the product listing instead of assuming they hold across an entire foam type.

Waterproof, Breathable, and ‘Cooling’ Features

A waterproof layer completely blocks liquid. Water-resistant only slows it down, and product names don't always make that difference clear. Check the fabric description on the actual listing before you buy, since the category name alone won't tell you which one you're getting.

Cooling claims are trickier. A cooling mattress topper or pad can make you sleep a bit cooler, but your own body heat and the type of material in the mattress underneath are the main things that affect how cool the bed feels. Breathability claims alone don't guarantee a particular outcome. Skip the marketing term. Check the feature description and the care label instead.

How to Check Size and Fit for a Mattress Pad vs. Topper?

Before you buy either product, work through this checklist. Getting the size wrong is the easiest way to end up with a layer that doesn't fit your bed.

1. Match the product's width and length to your mattress.
2. Record your mattress's depth.
3. Add the topper or pad's height on top of that depth when you check your fitted sheet's pocket size.
4. Check how it stays in place, whether that's a fitted skirt or elastic straps.
5. Check the manufacturer's guidance for adjustable bases if you use one.
6. Check whether the layer stays flat under a fitted sheet, and whether it has a non-slip backing.
7. Follow the manufacturer's own setup instructions ahead of any general advice.

Size names like twin or queen are only a starting point. Check the exact measurements on the product you're buying.

Can You Use a Mattress Pad and Topper Together?

Yes, in many cases. When products are compatible, you can layer a topper and a pad on the same mattress. A common order works like this: mattress, then topper, then pad or protector, then fitted sheet over everything. Treat that order as a general starting point. Follow your specific products' instructions first, since actual fit varies, and if you're using a protector, its coverage decides where it sits in the stack. Before you commit to layering, check the total stacked height against your sheets. Confirm each layer stays secured overnight, and watch for bunching once everything is in place.

When a Pad or Topper Is Not the Right Fix?

Before you weigh a mattress topper vs. pad decision, make sure the mattress itself is still sound. Neither product repairs what's actually broken. Deep sagging and failing support components are structural problems, and a layer on top doesn't address them. The same applies to damage that goes deeper than the surface. If your bed no longer feels like an acceptable place to sleep, inspect the mattress itself and check your current warranty or replacement options. An accessory won't fix that.

Mattress Pad or Topper: Final Decision Checklist

So, do you need a mattress pad or topper? Work through this checklist before you buy, then match what you find to the specific product page.

1. The outcome you actually want from this purchase.
2. Which category fits this exact outcome: pad, topper, or protector.
3. Your mattress's size and depth.
4. How much of a feel change you're looking for.
5. Verified material and feature details, not just the label.
6. The protection level you need, if any.
7. How it attaches, and whether it works with your sheets and adjustable base.
8. Care requirements for the specific product.
9. Current policy terms, like warranty or return details.
10. The mattress's overall condition.

Ready to compare options? Browse mattress accessories to see what's currently available, then match your pick against the checklist above before you check out.

FAQ

Is a mattress pad the same as a mattress protector?

No, absolutely not. A pad's role is light cushioning, while a protector's role is shielding the mattress from everyday wear. Some products combine both functions, sold as padded protectors, so check the listed features of the specific product instead of assuming from the category name.

What is a mattress pad?

A mattress pad is a thin layer that sits on top of your mattress, mainly for light cushioning. Some pads add a layer of protection too.

What is a mattress topper?

A mattress topper is a thicker layer that sits directly on your mattress under the fitted sheet. It's built to change how the mattress feels, more than a pad does. Because of that extra thickness, check your sheet's pocket depth before buying one.

What is a mattress topper vs. a pad?

A topper changes how firm or soft your mattress feels. A pad leaves that feel close to unchanged and adds a light layer on top instead. If you're unsure which one you need, ask yourself whether the mattress' actual feel needs to change, or just its surface.

Mattress topper vs. mattress pad: Which adds more height?

A topper usually adds more height than a pad, since it's built to reshape support, while a pad only sits on top as a thin layer. That's also why a topper needs more pocket depth from your fitted sheet than a pad does.

Foam sinks around your body under your weight. Spring construction pushes back right away, and air moves through the gaps between the coils. But the thing is, two foam beds from different manufacturers can feel nothing alike, just as two spring beds can. So the material alone probably won't settle the foam vs. spring mattress question for you. What settles it is what you can check on one model at a time: how it feels under your weight, how fast it responds, whether a partner's turning reaches you, how it handles heat, how firm the edges stay, how it wears, and what the base adds to the price.

Foam vs. Spring Mattress: Key Differences at a Glance

Here is how the two constructions usually behave:

None of this is a guarantee. Every row above is a tendency that a given build can reverse, so the spec sheet on the model outranks the general pattern.

What Is a Foam Mattress?

Foam mattresses take their name from the foam layers that make their tops soft. This construction doesn't include any coil core.

Foam is a category name including several distinct materials, but most of them are types of polyurethane foam. Memory foam softens under heat and pressure and returns to shape slowly, while polyfoam recovers quickly enough to work as a support layer underneath. Latex is a different material. It comes from rubber tree sap or a synthetic equivalent, and it is springier than both. Still, the material name only gets you so far.

Denser foam packs more material into the same space and resists bottoming out under your hips. Layer order determines what your body meets first. Firmness ratings vary within every one of the aforementioned materials. And these criteria vary from manufacturer to manufacturer; that's why two foam mattresses can use the same material and sleep like different beds.

What Is a Spring Mattress?

Spring mattresses, in contrast, carry your weight on a support core made of steel coils. Comfort layers sit above that core and shape the feel. So the word spring tells you what is holding you up, and at the same time, it tells you nothing about what you are lying on top of.

The variation here is in how coils are joined. For instance, in a traditional innerspring, the coils are linked, so pressing one pulls the neighbouring coils down with it. Pocket coils work differently: here, each coil sits in its own fabric sleeve and compresses only where the weight lands. That independence is how pocket coil mattresses are initially designed. One thing about spring beds surprises people. Many of them sold nowadays include foam in the comfort layers, often enough to shape how the bed actually feels.

How Foam and Spring Mattresses Compare in Detail

Thus, the foam mattress vs. spring mattress comparison gets more useful at the spec level. Coil count and gauge on one side, foam density and layer order on the other, predict how a bed performs more reliably than the material name alone.

Feel and Pressure Distribution

Under load, foam spreads your weight over a wider area. Both traditional innerspring mattresses and pocket coil mattresses concentrate support primarily in the areas where the coils compress. Due to this, at the same firmness rating, foam usually reads softer on first contact, because it yields gradually while coils push back from the start.

But first contact is a poor guide to the spring vs. foam mattress decision. Firmness rating and comfort layer depth shift how a mattress feels on first contact and over time. A firm foam model can sit closer to a plush spring model than to a soft foam one.

Motion Isolation and Partner Movement

Foam and pocket coils both keep a partner's movement local. Innerspring coils don't.

Foam absorbs the movement close to the area where it happens, so someone turning on the side registers weakly on the other side of the bed. Pocket coils reach the same result because each coil compresses on its own. Innerspring coils are joined, so the movement travels outwards across the bed. The word spring in a product description covers both coil types, and only the specification names the type of coils used.

Temperature and Airflow

An open coil core generally runs cooler than a dense all-foam build.

Air moves freely through the space between coils. Foam has no equivalent gap, so its temperature fully depends on the foam's formulation and density plus whatever the cover fabric and any cooling layer do above it. Open-cell foams and cooling covers can close the gap, sometimes completely. But neither construction guarantees an outcome here, so check what a specific model does about heat before you judge it by material alone.

Responsiveness and Ease of Movement

Coils and latex respond the instant you move. Memory foam takes a moment.

Memory foam holds the impression after you shift, so you briefly work against the old contour. Coils and latex give you something to push off. If you change position often, or if getting in and out of bed takes effort, slow response works against you every time you move.

Edge Support

Neither construction has firmer edges by default.

Perimeter build decides it. Some spring models reinforce the edges with firmer coils or a foam encasement, and some all-foam models use a higher-density perimeter for the same purpose. The difference shows if you sit on the edge to dress, or sleep close to the side. Specifications name the edge system when a model has one.

Durability and Maintenance

Neither construction outlasts the other by type alone.

Foam density, coil gauge, coil count, and cover quality set the ceiling. Body weight and frequency of use decide how close a mattress can get to that ceiling. The base underneath does the same, and the wrong one lets a mattress sag early. Use the foundation type the warranty names, or the manufacturer can refuse the claim when any sagging shows up. In this case, replacement will come out of your pocket.

Price and Overall Setup Cost

Both constructions run from entry level to premium.

Materials give you no read on the price band. The mattress price is also only part of the total. Check what a compatible foundation or base costs, whether the warranty requires one, what a protector adds, and what removal and delivery add, if anything. Those figures change by model and by order, so confirm them when you buy.

Foam and Spring Mattress Pros and Cons

The foam mattress pros and cons also work as trade-offs, and so do spring's.

Foam:

• Close contouring, which mutes feedback when you shift position.
• Strong motion absorption, weaker if the comfort layer is thin.
• Slow response on memory foam, quicker on latex.
• Heat depends on foam formulation and cover, so check both.

Spring:

• Immediate bounce, with the amount set by coil gauge.
• Airflow through the core, cut by thick foam above.
• More motion transfer on innerspring coils, less on pocket coils.
• Coils can develop noise with age, depending on build.

Weigh each point against how you actually sleep. A trade-off that never touches your night is not one for you.

Where Do Hybrid Mattresses Fit?

Hybrid mattresses pair a coil support core with thick foam or latex comfort layers. The coils supply bounce and airflow; the foam above supplies contouring, so hybrid shows traits from both sides, good and bad. A thick foam layer can also block the airflow the coils provide. How a hybrid performs depends on the same specs that decide any other mattress's performance.

How to Choose Between a Foam and Spring Mattress?

The foam or spring mattress question narrows fast once you answer for yourself:

• The feel you already know you like, from beds you have slept on.
• How much a partner's movement wakes you, and how often.
• Whether you sleep warm, and whether your bedroom runs warm too.
• How much bounce you want underneath you.
• Whether you sit on the edge or sleep near it.
• How heavy the mattress will be when you rotate it alone.
• Whether your current base or frame suits the model.
• Your total budget, including a base and a protector.

Then check the spec sheet on your shortlist for coil type, foam density, and firmness rating.

Also, one practical tip: rank your priorities first, then compare mattress options by construction, firmness, and price to see which model actually fits.

Ranking Your Priorities Settles It

Answers often pull in different directions. Someone who wants bounce and sleeps hot but shares a bed with a restless partner has no clean winner in either construction.

To have one, rank your answers. The one at the top decides the construction, and the specs decide whether a given model delivers on it. A pocket coil bed handles a restless partner. An open-cell foam core under a thin cover handles heat better than dense foam's reputation suggests.

From here, use your ranked answer to filter mattresses by construction, foam, spring, or hybrid, and compare the spec sheets side by side before you settle on a model.

FAQ

Is a foam mattress better than a spring mattress?

Neither wins outright. The memory foam vs. spring mattress choice comes down to whether you want contouring and low motion transfer (foam), or bounce and airflow (spring), and how well a given model delivers on it.

Do foam mattresses last longer than spring mattresses?

Foam mattress durability tracks foam density and cover quality. Spring mattress durability tracks coil gauge and count. Both also depend on body weight, the base underneath, and how you care for the mattress, so no construction outlasts the other by type.

Which mattress type is better for couples?

Motion isolation matters most for couples if one partner sleeps lightly, and pocket coil builds handle it far better than innerspring beds. Edge firmness matters when two people use the full width. Firmness preferences can also differ between partners, which no single mattress resolves.

Do spring mattresses sleep cooler than foam mattresses?

Often, since coils leave space for air. The foam vs. coil mattress gap narrows with cooling covers and open-cell foams, and a thick comfort layer over coils can cancel the advantage. Your bedroom temperature and bedding also affect the result.

Can foam and spring mattresses work on an adjustable base?

Both can. Adjustable-base compatibility is stated per model, so check the mattress and base specs to know exactly.

What is the difference between a spring mattress and a hybrid mattress?

The spring vs. hybrid mattress line sits at how much foam the bed carries above the coils. A spring mattress is coil-led with modest comfort layers. A hybrid pairs the coil core with substantial foam or latex. Manufacturers set that threshold themselves.

A standard double mattress measures 54 x 75 inches (137 x 190.5 cm). A standard queen measures 60 x 80 inches (152.5 x 203 cm). The queen is six inches wider and five inches longer, which makes it the better fit for two sleepers. The double covers less floor area, so it works in smaller bedrooms and for one adult who wants more width than a twin.

Choosing between a double vs. queen bed depends on 4 things: your bedroom dimensions, who sleeps in the bed, the frame you pair with the mattress, and your budget.

Double vs. Queen Bed Size Comparison

Note: “double” and “full” name the same standard size. Whichever term a product page uses, the full or double bed dimensions are 54 × 75 inches, and any mattress size chart in Canada lists them as one entry. Queen bed dimensions run 60 × 80 inches; this size has no other name in Canada.

Actual dimensions differ slightly between manufacturers, so read the actual specification on the product page you want to buy. Frame measurements are different numbers, because everything above describes the mattress alone.

How Much Bigger Is a Queen Bed Than a Double?

The difference between a double and queen bed is 6 inches of width and 5 inches of length. Split between two people, six inches works out to three inches each, which is what separates a couple sleeping shoulder to shoulder from a couple with room to move. The five inches of length matter for anyone near or over six feet.

Double vs. Queen Bed Dimensions and Room Fit

Let’s clarify an important rule: mattress numbers are not planning numbers.

Every bed frame adds width and length around the mattress, and the amounts vary with the specific design and manufacturer. For instance, platform models stay close to the mattress edge, while storage beds push out farther to fit the drawers.

For this reason, a double bed vs. queen bed decision runs on the external measurements, not the mattress size. Check the specifications on the double and queen bed frames you shortlist. Then check your room. Doors and closets need swing space, drawers need pull-out space, floor vents need to stay uncovered, a nightstand needs floor space of its own, and finally, you need walking clearance where you get in and out.

Measuring Your Bedroom Before Choosing

Five steps, in order:

1. Work out how much floor you actually have. Bump-outs and radiators take floor space that the room’s stated dimensions don’t account for.
2. Copy the frame’s outside width and length from the spec sheet, headboard included.
3. Run painter’s tape around that shape on the floor.
4. Open every door and drawer that swings or pulls into the taped area to confirm nothing is blocked.
5. Test the routes you take to and from the bed, normally one long side and the foot.

Room-size numbers online are a rough starting point. What settles the floor space is your own layout and the frame you buy. Our guide on how to measure a room for furniture covers that math in detail.

Which Size Works Better in a Small Bedroom?

A double fits a condo bedroom or a narrow guest room with less trouble. A queen can still work in a compact room, but only where the layout leaves genuine clearance around the frame.

That usually means the bed sits against the long wall and nothing else competes for the floor. For a single sleeper in an apartment or a guest room, the extra six inches rarely justify what the room gives up. Don’t sacrifice drawer, closet access, and your walking path in order to fit the larger mattress.

Who Should Choose a Double Bed?

Pick a double if you match one of these criteria:

• Solo adults who want more width than a twin;
• Guest rooms and second bedrooms in occasional use;
• Condo and apartment bedrooms where floor space sets the limits;
• Shoppers keeping the total setup cost down;
• Rooms that need to hold a desk, a dresser or a crib alongside the bed.

Since full and double name the same size, you can shop it in our full-size mattresses category. When you shop, search for both terms. Full-size mattresses and double mattresses are the same 54 × 75 inches, so a listing under either name gives you the same bed.

A double bed for one person leaves enough room to spread out. For most couples sharing the bed nightly, 54 inches will definitely run tight. At 75 inches, a double leaves about three inches of clearance for a six-foot sleeper and none above 6'3".

Who Should Choose a Queen Bed?

Pick a queen if you match one of these criteria:

• Couples who want more shared sleeping space;
• Solo sleepers who prefer the extra room;
• Taller adults who gain from the five extra inches of length;
• Primary bedrooms with the floor space to take it;
• Shoppers who want the most widely stocked size for mattresses and bedding.

A queen bed for couples is the default choice in Canada. That popularity is why queen mattresses come in the widest selection of models and firmness levels. The trade-off is footprint and cost. A queen takes more floor space than a double, and everything you buy for it costs more, from the frame to the sheets.

Double vs. Queen Bed for One Person or a Couple

Cost of a Double Bed vs. Queen Bed

Queen-sized products cost more than their double equivalents. The gap depends on brand, materials, construction, and whatever promotion is running. The same rule applies to the bed frame, the protector, the sheets, and the duvet.

Comparing prices on the sleep surface alone understates the gap, since bedding and frame differences stack on top of it. Price the full setup instead, and check current listings for what’s in stock.

Double or Queen Bed: Quick Decision Checklist

Before you order, confirm the mattress and frame measurements separately, because for both a double bed and a queen bed, those are two different numbers.

FAQs

Full vs. queen bed: what’s the difference?

Full and double are two names for the same size, so this is the same question as double vs. queen. Only the label on the product changes. You’re looking at two mattress sizes: 54 x 75 inches for full or double against 60 x 80 for queen.

What is the queen bed size in Canada?

The standard queen size in Canada is 60 x 80 inches, or 152.5 x 203 cm. Individual products vary by around an inch, so read the specification on the page before you order.

What is the double bed size in Canada?

The standard double size in Canada is 54 x 75 inches, or 137 x 190.5 cm. Listings carry it under both names, so a search for "full" returns the same beds as a search for "double" does.

Does the queen vs. double bed size difference matter for two sleepers?

Yes, if you share every night. Six extra inches of width gives each person three inches of free space. That's the difference couples notice most, along with five extra inches for taller sleepers.

Can a queen bed fit in a guest room or condo bedroom?

Sometimes. Tape out the frame footprint and check that your doors and drawers still open inside it. Where they don't, a double is the better fit for the room.

Canada uses 6 standard mattress sizes: Twin/Single, Twin XL, Double/Full, Queen, King and California King. The double names are the first thing that trips people up: Canadian mattress sizes often carry two labels for the same dimensions. The bed size chart below sorts all of this out.

Canadian Mattress Size Chart in Inches and Centimetres

Here's the bed size chart in cm and inches side by side, so you can compare standard sizes against your room measurements in whichever unit your tape uses.

Exact dimensions can vary by a centimetre or two between manufacturers, so always confirm the listed measurements on the product page. Once you know your size, you can shop mattresses by size and compare models directly.

What Each Standard Bed Size Is Best For

Two numbers settle most of this decision. Width decides how many people sleep comfortably, and length decides whether tall sleepers fit. Everything below is those two numbers applied to real rooms and real people. Here's each of the six Canadian sizes in detail:

Twin and Twin XL

Twin is the smallest standard size on any bed sizes chart. In Canada it usually goes by its local name, the Single bed. It fits kids' rooms and other tight spaces, and it's what bunk beds are built around. Twin XL keeps the same width and adds five inches of length. That extra length is why dorms use it: a tall sleeper fits, and the footprint stays small.

Double or Full

Double and Full are one size with two names, which is why a mattress sizes chart lists them in a single row. Compared with a Twin, a Double adds sixteen inches of width, and for a solo sleeper that's the difference between fitting in the bed and spreading out in it. The length stays at 75 inches. Sleepers approaching six feet should take that number seriously before buying.

Queen

A Queen adds width and length over a Double, and that's the point where a bed stops being generous for one and becomes comfortable for two. Couples treat it as the default for a reason. On any bed size comparison chart, the Queen sits in the middle, so it's the natural reference point: step down if the room is tight, step up if you both want more space.

King and California King

A King gives two sleepers sixteen more inches of width than a Queen, enough to stop negotiating territory at night. California King is a different trade, four inches narrower and four inches longer , so neither wins outright. Pick by what runs out first in your bed: elbow room or legroom. A split King, two Twin XLs side by side, suits couples who want an adjustable base with separate settings. RV and custom sizes follow their own measurements and sit outside standard charts entirely.

How to Choose the Right Bed Size

Before picking the right size from our bed sizing chart, work through these four checks:

• Count the sleepers.

Include pets if they share the bed; a large dog claims as much width as a small adult.

• Check sleeper height and preferred space.

Anyone over 6 feet should look at 80-inch lengths or longer.

• Measure the room.

Keep roughly 60 cm of walking clearance around the bed, because room size limits your options faster than budget does.

• Check the delivery path.

Doorways, stairs and hallways all matter, as does clearance for a matching bed frame and the rest of your furniture.

Before you commit, tape the mattress footprint on the floor. Seeing the real rectangle inside your room dimensions beats imagining it every time.

Match Your Mattress, Bed Frame and Foundation

Labels alone aren't enough. Two products both marked "Queen" can differ by a couple of centimetres , so compare the listed width and length on the mattress and on the frame before you buy. A size chart tells you what a Queen should measure; the product page tells you what this Queen actually measures.

The foundation needs the same check. Mattress warranties often specify the support type, whether that's a box spring, a platform, or an adjustable base. You'll find box springs and mattress bases listed with their exact dimensions and supported mattress types, so matching them takes a minute.

One last clarification: thickness changes bed height, never the footprint. Your fitted sheets care about thickness; your frame cares about footprint.

Final Bed Size Checklist

Run through these five checks before you order:

• Exact dimensions confirmed on the product page
• Room clearance measured, tape on the floor
• Frame size matched to the listed numbers
• Foundation compatibility checked against the warranty
• Delivery path clear from the door to the bedroom

That's the whole bed size chart put to work. When you've settled on a size, browse the mattresses in that dimension and compare from there.

FAQ

Are Canadian and US mattress sizes the same?

Yes, the labels align across both markets, so a Canadian bed size chart matches its American counterpart size for size. Listed dimensions can still differ slightly from maker to maker, though. Always confirm the exact specs on the product page.

Is a Double bed the same as a Full bed in Canada?

Yes, they're two names for one size, and that's why any mattress sizing chart lists them together. Check the listed dimensions anyway, since individual products can vary by a centimetre or two.

What is the difference between a King and California King?

A King measures 76 x 80 inches, a California King 72 x 84. Neither is larger overall: the difference is a straight trade, four inches of width for four inches of length.

Should a bed frame be the same size as the mattress?

The named size must match, so a Queen mattress needs a Queen frame. Beyond that, compare the listed bed dimensions on both products, since bed frames vary slightly, and confirm the frame provides the support system the mattress warranty requires.

Does mattress thickness change the bed size?

No. Thickness changes the height of the bed, while the width-and-length footprint stays standard. The one practical effect: deep mattresses may need deep-pocket sheets.